Arrotile Wall Fix (Grey/White) Tile Adhesive

Price 1200.0 INR/ Bags

Get a Price/Quote

MOQ : 50 Bags

Arrotile Wall Fix (Grey/White) Tile Adhesive Specification

Types Of Chemical
Construction Chemicals

Material
BOPP

Adhesive Type
Other

Other Names
NO

Usage
Construction

Grade
A+

Application
Method of Application 1 Surface Preparation The surface should be sound, clean, and free from dirt, oil or grease before Arrotile Adhesive is applied | Substrate should be in Saturated Surface Dry (SSD) condition before application of adhesive | Substrates should be in plumb before application of adhesive 2 Mixing Mix 20 kg of Arrotile Adhesive with 5 to 6 liters of water | Mix to a uniform lump-free consistency using a forced action mixer | Keep it for approximately 5 minutes to fatten it | Hand mixing is recommended for small quantities only | Mix as much quantity as can be consumed in 25 min. 3 Application Apply Arrotile Adhesive paste on substrate with plain side of notch trowel. Press paste firmly to work into substrate. Comb with notch trowel with notched side, notch trowel to be selected as per required bed thickness | Spread as much adhesive paste as can be tiled within 15 minutes | Start placing/fixing of tiles & tap using beating block or rubber mallet | For large format tiles & stone provide back butter for 100% coverage & firm bonding | Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive, if not proper and if becomes non-sticky then scrap it & apply paste again... 4 GROUTING Grouting should preferably be carried out at least 24 hours after the completion of tiling. For grout joints upto 3mm wide use Arrotile Tile Grout & Epoxy Grout | For grout joints above 3mm wide use RTM Wide | After grouting clean and polish tiles with a damp sponge or cloth 5 CLEANING Clean the tools & equipments with potable water immediately after use. Precautions & Limitations Always add powder to liquid and not liquid to powder While working in temperature more than 35 C (95 F) always dampen the substrate & finish faster Tiling should not be done when surface temperature is below 40 C. Health & Safety Precautions Protective clothing, such as gloves and goggles, should be worn. Treat any contact to the skin eyes with fresh water immediately. Do not induce vomiting & seek medical Assistance immediately Reseal pack after use and ensure product is stored as instructed.. Shelf Life & Storage Shelf life is 12 months from the date of manufacturing in unopened conditions. Store in a cool & dry place.